Separate names with a comma.
Some cardboards were used to test the clearance for the roof. [IMG] [IMG] The design was cut out using a laser machine once the shape has...
Dropped by an acrylic shop to find a way to make a better wind deflector. Took out the stock one. It wasn't straightforward but got it out...
I managed to remove and install a new one today. The process was quite terrifying as I had to twist and turn the deflector quite a bit in order to...
Is there a guide to removing the wind deflector correctly? Thanks!
So I have finally managed to get the 13" steel rims fixed on after some grinding. Although I have not weighed the wheels, overall the car feels...
In case anyone else is keen to know, there is a connector below the seats. The seat belt light does not light up if this connector is disabled. ;)
that is correct... the ride does not come with it as it is way too hot to use it in tropical Singapore. :)
I think this was used under my hood, a product called Hoodliner (19mm thick). I certainly hopes it does its job well and not overheat the engine....
Bought this wooden hand brake from Japan... finally get the chance to put it on. [IMG] [IMG] [IMG] My first wooden interior piece......
Now for another lay of thick cushion. [IMG] [IMG] [IMG] [IMG]
Brought my ride to the audio shop again this morning. This time to do up the hood sound deadening, hoping to achieve a quieter ride. [IMG]...
The hubcaps come with wires to tighten the fit onto the steel rims (if necessary). [IMG] All done up! :):):) [IMG] [IMG] One shot...
Checking for suspension leakage. [IMG] Back to the shop and all ready for the hubcaps. [IMG]
Get the steel rims into the tyres but not fully pumped up so that the white wall inserts can be squeezed in. [IMG] Gentle care to ensure the...
Here we go again... out comes the stock black rims. [IMG] Add in the 5mm spacers... [IMG]
DaG, the inside of the wheels have different protruding area... so I guess it is easier to grind away those areas instead of grinding away on the...
I certainly hope so too! :):):)
Unfortunately, the tyre shop nearby was already closed when the work was done. So they can't get fitted on tonight. :mad: But I had a glimpse...
Here goes nothing! My heart skipped a little when I saw the sparks flew! :eek::eek::eek: [IMG] About 1.5mm was shaved off. [IMG] [IMG]...
Thanks Adam! So much research work and effort has been put into this. There is no turning back now. :)
