Separate names with a comma.
Given that my Copen came with a 1.3 liter K3-VE engine from the factory I reckon it should be possible. You should also be able to get the same...
See if you can find a 1.3l K3-VE engine from a Daihatsu Sirion, the swap should be the easiest, as the european Daihatu Copen has this engine from...
lol i did not see it was a la400k, but to be honest, it should be the same for the old and new model, shouldnt it?
Hi Do you mean the fuel cap (the one that screws in) or the cover that flips open if you pull the lever in the center console? As for the roof,...
p0136 is exactly that. Dont worry, your car will not blow up Just get the wiring to the rear o2 sensor and the sensor itself checked. Every garage...
If it really is the rear o2 sensor (where did you get that information?) then its not a big issue. The rear one does not do anything to the fuel...
Basically any shop can replace a broken o2 sensor, no need to drive 20 miles. Apart from that, a broken rear o2 sensor is no big issue, it will...
What Rob said, 1 litre of brake fluid, one litre of ATF and about 1.5 litres of Glysantin G30 (they come in 1.5 litre bottles) But to be honest,...
Power Steering Fluid: Dexron III (I used Aral ATF 55, but I guess its not available outside of germany) Brake Fluid: DOT4 (Standard stuff)...
Hi and welcome I guess its very cold in canada at the moment, thats why the pump might be a bit slower. As for the light staying on, do you also...
Bought a Dunlop battery charger a week ago, its very similar to this one:...
Thank you for clearing that up
There must be some code either on the shocks themselves or on the carton, otherwise I would be very suspicious about the origins of those parts
@copenforbusiness Do you have the Monroe parts number for those? I think it would help all the others still searching and they would not be...
Come to Germany and I will show you what dark weather is :D
The alloy corrosion is one of the things I would worry the least about. Real rust in places you cannot see is much more frightening :D
I had, among other things, to have my right rear fender panel replaced due to an accident. The unpainted part (6016197201) was 303 Euro in 2015....
Sills and rear wheel arches are welded in, there is no taking them off easily If you want to see what it looks like inside the sill, just get an...
They are basically where the notches in the sills are (on the very front and the very back)
@ady_bod @Nedryerson Unfortunately Soc has sold his Copen and will not return to this forum. You will find the service manual in the resources...
